Isuzu Ascender

Isuzu Ascender is good car model



Spesifications:
ENGINE
Displacement : 4.2 liters
Configuration : Inline 6-cylinder
Compression ratio (:1) : 10.3
Horsepower @ rpm : 285 @ 6,000
Torque (lb-ft) @ rpm : 276 @ 4,600
Fuel intake : Sequential multi-point fuel injection
Spark plugs : Platinum-tipped
Ignition : Coil-on-plug
DRIVETRAIN
Type : Front-engine/rear-wheel drive or 4-wheel drive
TRANSMISSION
Type : 4-speed automatic transmission with torque converter clutch (in 3rd or 4th gears and overdrive)
SUSPENSION
Front : Independent coil-over-shock with upper and lower control arms and hydraulic double-acting shock absorbers
Rear : 5-link with coil springs and direct hydraulic double-acting shock absorbers
BRAKES
Type : 4-wheel ventilated disc brakes with dual-piston front calipers and 4-wheel Anti-lock Brake System (ABS)
STEERING
Type : Hydraulically assisted rack-and-pinion power steering
Ratio (:1) : 20.4
Turns, lock-to-lock : 3.82
Turning circle, curb-to-curb : 36.4 ft
WHEELS AND TIRES
Wheel type : 6-spoke machined-finish aluminum alloy
Size : 17 x 7.0 inches
Tires : P245/65R17 on-/off-road
Spare : P235/75R16
MILEAGE ESTIMATES AND FUEL CAPACITY
Fuel tank : 21.7 gal
Fuel economy (city/highway)1
Automatic 2WD
Automatic 4WD
14/20 mpg
14/20 mpg
WEIGHT AND CAPACITIES
Curb weight, 2WD/4WD : 4,417/4,594 lb
Payload2,3, 2WD/4WD : 1,133/1,156 lb
Maximum trailer weight4 2WD/4WD : 5,300/5,200 lb (3.42 axle) 5,800/5,700 lb (3.73 axle)
Gross Vehicle Weight Rating (GVWR)5, 2WD/4WD : 5,550/5,750 lb
Gross Combination Weight Rating (GCWR)6 : 10,000 lb (3.42 axle) 10,500 lb (3.73 axle)
EXTERIOR DIMENSIONS
Wheelbase : 113.0 in
Overall length : 191.6 in
Overall width : 76.1 in
Overall height, with roof rails : 74.5 in
Track, front/rear : 63.1/62.1 in
Ground clearance, minimum at differential : 8.0 in
Angle of approach : 29°
Angle of departure, undermount spare : 23°
Ramp breakover angle, 2WD/4WD : 18.8°/18.6°
Isuzu Ascender is good car model